__header.logo.alt

BIOCLASS IC 150

Pellet boilers

  • Heating
  • For medium power installation
  • Electronic modulation
  • Automatic cleaning system
  • Integrated vacuum system
  • High-capacity ash compressor
  • Automatic combustion adjustment
  • Intermediary hopper included
  • Adattata a ErP Classe A
  • Class 5
  • Modbus

Si quieres ver el catálogo, manual o etiqueta energética de este producto, pincha aqui

Characteristics of Pellet boilers BIOCLASS IC 150

Robust, economic and safe: the BIOCLASS iC 150 boiler is the result of decades of experience and a long and uninterrupted development
process.

This fully automatic boiler is capable of burning wooden pellets efficiently, obtaining very high performance (>92%) with minimum emissions. In addition, the boiler’s compact design requires very little space and offers the customer a high degree of versatility and easy maintenance.

Advantages Pellet boilers BIOCLASS IC 150

Optimal combustion controlled by Lambda probe
Continuous control of the pressure and the quality of combustion gases by a Lambda probe enables automatic calibration of required fuel while adapting to fuel quality and installation conditions.
Thus, the boiler always works at the required power and optimal combustion levels.

Automatic continious cleaning system
This boiler features fully automatic cleaning of both the flue gas heat transfer system (by a series of cams operated by a motor) and the burner (via a mobile base).
Automatic cleaning is performed without having to shut down the boiler, so boiler service is not interrupted at any time, unless necessary to adjust the temperature or check the installation.

Triple flame return safety system
The triple safety system ensures reliable insulation between the silo and the pellet burner, guaranteeing maximum safety against flame return.
A temperature probe located at the pellet intake stops operation of the screw conveyor motors. The boiler also features a capacitive sensor that shuts off pellet feeding in the event of accumulation at the entrance to the burner, as well as an extinguishable connection if high temperatures are detected in the pellet intake to the burner.

Active suction system even with the flame lit
The design of the suction system’s cyclone bowl ensures that it can continue operating even while the burner is on.
Moreover, the suction system is configured to prevent a vacuum in the pellet tank, thereby avoiding the need for actuators and rotary valves and increasing boiler simplicity and robustness.

High-capacity ash box
The pellet combustion system of the Bioclass IC 150 generates small amounts of ash and is equipped with a high-capacity ash compressor so the ash box only has to be emptied between one and three times a year.
The large ash box is integrated and connected to the boiler and capable of collecting the ash of up to 7 tons of pellets.

Modular combustion chamber for low burner maintenance
The segmented combustion chamber reduces maintenance costs, since both preventive and corrective maintenance can be performed locally.

Dual ignition system
The dual ignition system is a smart system that sends an alert if a resistor has reached the end of its useful life and allows the boiler to continue operating until it is replaced. This system also reduces the number of resistor startups, which significantly prolongs their operation. This combination of less operating time and resistor failure prediction is an extremely reliable solution.

Coil-less overheatin protection system
Lower thermal inertia due to the large capacity of the primary circuit and absence of high-mass refractory components avoids the need for coil cooling. This reduces consumption of unnecessary water and facilitates installation of the hydraulics.

Catalogue documentation

__banner.contacto.imagen_alt

Title

Description

Help

Contact us

Fill in the form below and we will contact you as soon as possible.

+34 943 81 38 99

Contact form

*Mandatory fields