Cookies Policy

This website uses cookies to offer you a better user experience. You can get more information in our Cookies Policy.

Press the ACCEPT button to confirm that you have read and accepted the information presented. After accepting we will not show this message again..

ACCEPT

Hot water tanks
SANIT DC/DCE

  • Stainless steel tank
  • Double covering

Domestic hot water cylinders

SANIT 100-250 is a range of hot water tanks with capacities from 100 - 250 litres, manufactured in stainless steel, for supplying domestic hot water.

They include a double-wall "water bath” type heat exchanger and can be used with any type of heating power (thermal solar, gas, gas-oil, electricity, biomass, heat pump, etc).

Advantages SANIT DC/DCE

DUAL-CASING TANK

Dual-chamber tanks for production and storage of domestic hot water, with capacities ranging from 100 litres to 250 litres.

Coupled with a heating boiler, DOMUSA TEKNIK is able to provide the right level of comfort for your home and provide a balanced and economical domestic hot water supply when accompanied by accompanied by a suitable hydraulic installation.

The careful design of the tank and casing allows the tank to give exceptional performance, enabling its use with a boiler, solar panel, or heat pump.

STAINLESS STEEL

The SANIT tanks are built of stainless steel, complying with the strictest hygiene requirements. This material also has a high transmission coefficient that gives the tank a great capacity to produce domestic hot water.

Stainless steel is a material with exceptional properties in terms of peeling, oxidation, and sedimentation.

On its surface, a patina is created naturally, causing a self-protection that prevents oxidation even in installations with extremely corrosive waters.

INSULATION

Thermally insulated with rigid moulded polyurethane foam, all models have an access opening at the top, which facilitates cleaning of the tank. It also includes an outlet intended for electrical resistance.

RANGE

2 VERSIONS:

Sanit DC:

Tank for free-standing or wall installation with a dual-casing exchange system for combination with boilers that incorporates a control over the production of domestic hot water.

Sanit DCE:

Tank for free-standing or wall installation with a dual-casing exchange system equipped with a control and regulation system for combination with any kind of boiler.

Technical Data

MODELSSANIT DC 100
SANIT DCE 100
SANIT DC 150
SANIT DCE 150
SANIT DC 200
SANIT DCE 200
SANIT DC 250
SANIT DCE 250
Base dimensions mm Ø581 Ø581 Ø581 Ø608
Height dimensions mm 898 1,227 1,563 1,628
TP1 Drain valve inlet Ø 1/2” H 1/2” H 1/2” H 1/2” H
TP2 Drain valve inlet Ø 3/8” H 3/8” H 3/8” H 3/8” H
Cold water input Ø 3/4” M 3/4” M 3/4” M 3/4” M
Hot water output Ø 3/4” M 3/4” M 3/4” M 3/4” M
Primary inlet/outlet Ø 1” H 1” H 1” H 1” H
PI height – dimension A mm 620 900 1,200 1,491
MODELSSANIT DC 100
SANIT DCE 100
SANIT DC 150
SANIT DCE 150
SANIT DC 200
SANIT DCE 200
SANIT DC 250
SANIT DCE 250
Characteristics
Installation floor / wall / horizontal floor / wall / horizontal floor / wall / horizontal floor / wall / horizontal
Total volume L. 100 150 200 250
Max. storage temperature ºC 90 90 90 90
Maximum working pressure of the tank bar 7 7 7 7
Max. primary temperature ºC 110 110 110 110
Maximum primary working pressure bar 3 3 3 3
Operation
Continuous flow l/h D 30º Qp 1 m3/h
Qp 3 m3/h
Qp 5 m3/h
602
745
831
766
825
944
844
942
1,046
930
1,038
1,143
Peak flow l/10 min D 30º Qp 1 m3/h
Qp 3 m3/h
Qp 5 m3/h
266
290
305
378
388
407
474
490
507
571
589
607
Flow up to 1 hour l/h D 30º Qp 1 m3/h
Qp 3 m3/h
Qp 5 m3/h
702
845
931
916
975
1,094
1,044
1,142
1,246
1,180
1,288
1,393
Power transmitted kW Qp 1 m3/h
Qp 3 m3/h
Qp 5 m3/h
21
26
29
27
29
33
29
33
36
30
36
40
DHW efficiency class

Qp: Primary flow rate / Primary temperature 80°C / Storage temperature 60°C

MODELS

SANIT DC

SANIT DCE

OPTIONS

Thermometer S 200 hydraulic kit: 100 L / 1.5 kW resistor kit
Adjustable thermostat Dielectric sleeves 100 L / 2.5 kW resistor kit
On/off switch Safety unit 150 L / 1.5 kW resistor kit
8 L expansion vessel 150 L / 2.5 kW resistor kit
Cathodic protection 200-250 L / 1.5 kW resistor kit
1.5 kW/2.5 kW/3.5 kW electrical resistor 200-250 L / 2.5 kW resistor kit
Board bracket
Elliptic cover with resistor inlet
MORE INFORMATION IN CASE OF BEING A PROFESSIONAL?

Other tanks that may interest you