The MINNY boiler reduces the consumption of the system minimizing contaminating gases by using condensation technology. To take full advantage of the condensation effect the temperature of the combustion gases must be lowered below the dew point temperature. This reduction of gas temperature takes place in the stainless steel condenser.
Its design is aimed to be functional for the professional. Being fully equipped and reduced in size allows it to be fitted in small spaces around the home, even under worktops. The ability to position the gas outlet at the back, at the top or side of the boiler and with a reduced diameter (80mm) makes it easily adaptable to any kind of installation.
The configuration and positioning of the boiler components have been designed to allow maintenance access from the front of the boiler thus reducing maintenance costs and making access easier. Maintenance and cleaning of the stainless steel condenser can be carried out from the front of the boiler without the need of any disassembly.
Our highly intuitive control panel provides safety and operational advantages. These advantages include lack of water, pump anti-block, anti-inertia and antifreeze alarm systems.
MODEL | HEAT OUTPUT 50°C/30°C kW |
HEAT OUTPUR 80°C/60°C kW |
ENERGY EFFICINCY CLASS HEATING |
DHW EFFICIENCY CLASS |
---|---|---|---|---|
MINNY DUO 30 | 32,1 | 30 | ||
MINNY CAL 20 | 21,5 | 20 | - | |
MINNY CAL 30 | 32,1 | 30 | - |
MINNY DUO | MINNY CAL | |
---|---|---|
HEATING RETAINING VALVE | ||
HEATING CIRCUIT PUMP | ||
PRESSURE TRANSDUCER | ||
SAFETY VALVE | ||
AUTOMATIC AIR VENT | ||
HEATING CIRCUIT EXPANSION VALVE | ||
HEATING EXPANSION VALVE | ||
FILLING VALVE | ||
CONDENSING BOILER | ||
CONDENSATE DRAIN | ||
EMPTYING VALVE | ||
BURNER | ||
TELEPHONE RELAY CONNECTION | ||
COIL HEAT EXCHANGER | ||
DIVERTER VALVE | ||
DHW FLOW RATE LIMITER | ||
PUMP ANTI BLOCK SYSTEM | ||
MINIMUM PRESSURE LIMITER | ||
ANTI-FREEZE | ||
DHW MODULATION | ||
ELECTRIC CONNECTION FOR CYLINDER | ||
MINNY DUO / CAL