AIR SOURCE HEAT PUMPS

DUAL CLIMA HT

    • MONOBLOCK
    • HIGH TEMPERATURE HEAT PUMP 75º C
    • NATURAL REFRIGERANT WITH LOW GWP
    • SCOP AS HIGH AS 6.4, HIGH EFFICIENCY
    • Sizes: 6, 9,12 and 16 kw
Imagen bomba calor dual clima r
Icono etiqueta erp clase a+++    Icono garantía 5 años compresor

DUAL CLIMA HT

DOMUSA TEKNIK high temperature air source heat pump is the ideal renewable energy solution for new homes or renovations of existing installations.

This technology provides cost-free use of heat contained in the air to reduce home energy consumption by as much as 70% compared with traditional systems (fossil fuel boilers), while generating subsequent savings in energy bills. The high temperature of the water supply (up to 75ºC) is ideal for previously installed radiator systems, enabling an easy and inexpensive transition to clean energy.

 

Ventajas AIR SOURCE HEAT PUMP DUAL CLIMA HT

¿Is it time to replace your boiler? It may also be time to install new technology

Temperature changes everything. The DUAL CLIMA R heat pump reduces total household energy costs up to 70% by using the free energy contained in the air.  

Surprising savings and distinct environmental advantages

See the results in the chart below. As shown, its carbon footprint is considerably lower than that of other alternatives in the market. R290 is a refrigerant gas with nearly zero atmospheric heating potential (AHP3) and currently the most ecological solution for air conditioning. Air source energy is a clean and environmentally-friendly technology.  

Safe technology

It can be installed by any licensed professional. The monoblock system allows the unit to be installed without having to handle refrigerant gases. The equipment is completely airtight, thereby eliminating the risk of gas leaks. A very simple installation that involves only water being supplied to the home.

The highest energy efficiency rating

Highly efficient use of air energy, with a SCOP of 6.4, enables the Dual Clima HT system to boast an A+++ rating for energy efficiency. This, in turn, lowers total energy costs.


Water supply temperature at 75ºº

Compatible with existing installations. Given the high temperature of its water supply, the Dual Clima HT system is ideal for replacing older, less efficient systems. Not only is it compatible with radiators, but it also requires little domestic hot water accumulation capacity.

Protection of hydraulic components against freezing

Electronic control of the DUAL CLIMA R heat pump activates the flow pump and the compressor when necessary, preventing the water temperature from falling below freezing. Two solutions are available to prevent freezing in the event of prolonged power cuts:  
•    Ice prevention valve that empties the water circuit when the water temperature falls below freezing.
•    Balancing tanks with a built-in partition that enable using glycol in a low-capacity circuit that does not require maintenance

 

 

Technical characteristics

 

Technical

Etiqueta
ETIQUETA DE PRODUCTO DUAL CLIMA 6HT
Etiqueta
ETIQUETA DE CONJUNTO DUAL CLIMA 6HT

Etiqueta
ETIQUETA DE PRODUCTO DUAL CLIMA 9HT
Etiqueta
ETIQUETA DE CONJUNTO DUAL CLIMA 9HT
Catálogo
DUAL CLIMA HT

Etiqueta
ETIQUETA DE PRODUCTO DUAL CLIMA 12HT
Etiqueta
ETIQUETA DE CONJUNTO DUAL CLIMA 12HT
Catálogo
DUAL CLIMA HT

Etiqueta
ETIQUETA DE PRODUCTO DUAL CLIMA 16HT
Etiqueta
ETIQUETA DE CONJUNTO DUAL CLIMA 16HT
Catálogo
DUAL CLIMA HT

También te puede interesar

Fusion TRIO HT

Hydraulic module for cold, heat and domestic hot water with inertia tank for DUA CLIMA HT Heat Pump


Easy, all-in-one installation.

  • Integrated inertia tank.
  • Stainless steel domestic hot water tank.
  • Completely equipped

Fusion HT

Hydraulic module for cold, heat and domestic hot water for DUAL CLIMA Heat Pump.


    • Stainless steel domestic hot water tank.
    • Completely equipped.
    • Integrated hydraulic module.

BT Trio

Inertia tank with hot water accumulator for cold, heat and domestic hot water.


    • Primary accumulation and domestic hot water.
    • Stainless steel hot water accumulators.
    • For cooling and heating.
    • Capacity for 200 L of DHW.
    • Capacities: 50 and 80 L inertia tanks.

Sanit HE

The Sanit HE is a hot water cylinder for free-standing installation with a heating coil exchange system that combines with heat pumps.


    • Stainless steel accumulator
    • Large exchange surface.
    • Capacities: 150, 200 and 300 L.

Sanit HE DS

The Sanit HE DS is a hot water cylinder for free-standing installation with a double heating coil exchange system that combines with heat pumps and back-up systems.


    • Stainless steel accumulator
    • Double heating coil exchange system for back-up energy.
    • Large exchange surface.
    • Capacities: 200 and 300 L.

BT 50

The BT 50 buffer tank is intended to be used in closed cooling or heating circuits. This tank increases the total volume of the air-conditioning installation, thereby reducing the number of start-ups required for the cold or heat generator.


    • Compact.
    • Primary accumulator.
    • For cooling and heating.
    • Capacity 50 litres.

BTS 100-150

Inertial tank with partition for a heat pump.


    • Reduces antifreeze liquid requirements.
    • Primary accumulator with partition.
    • For cooling and heating.
    • Capacities: 100 and 150 L.
Imagen miniatura bomba calor dual clima r