Hot water cylinders
SANIT SE 100-300
- Stainless steel cylinder
- Coil exchanger
SANIT 300-1000 is a range of hot water tanks with capacities of 300 - 1000 litres, manufactured in stainless steel, for supplying domestic hot water.
They include a coil pipe heat exchanger and can be used with any type of heating power (thermal solar, gas, gas-oil, electricity, biomass, heat pump, etc.).
These appliances provide a plentiful supply of DHW and are the ideal solution for single-family homes or small multi-family dwellings.
For sanitary water heating, the SANIT SE models use a coil heat exchanger with a long stroke, thereby achieving maximum heat exchange, improving efficiency and reducing the recovery time for DHW production.
With this system, the entire tank is maintained at homogeneous temperatures, avoiding cold areas in which bacteria such as Legionella can grow.
The SANIT tanks are built of stainless steel, complying with the strictest hygiene requirements. This material also has a high transmission coeffi cient that gives the tank a great capacity to produce domestic hot water.
Stainless steel is a material with exceptional properties against possible peeling, oxidation, and sedimentation.
On its surface, a patina is created naturally, causing a self-protection that prevents oxidation even in installations with extremely corrosive waters.
Thermally insulated with rigid moulded polyurethane foam, all models have an access opening at the top, which facilitates cleaning of the tank. It also includes anoutlet intended for electrical resistance.
SANIT SE:
Tank for free-standing installation with a coil exchange system and equipped by default with a control and regulation system for combination with all types of boiler.
| A | B | C | D | E | F | G | HEIGHT | BASE DIMENSION | RETURN | COLD WATER INPUT / HOT WATER OUTPUT | PRIMARY INLET / OUTLET | RESISTOR INLET | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MODELS | MM | MM | MM | MM | MM | MM | MM | MM | MM | RACS Ø | ES/SSØ | EP/SPØ | R Ø |
| SANIT SE 100 | 525 | 270 | 400 | 190 | - | - | 325 | 898 | Ø 581 | 1/2" H | 3/4” M | 3/4” M | 1 1/4” H |
| SANIT SE 150 | 525 | 270 | 400 | 190 | - | - | 325 | 1,227 | Ø 581 | 1/2" H | 3/4” M | 3/4” M | 1 1/4” H |
| SANIT SE 200 | 620 | 270 | 650 | 190 | - | - | 325 | 1,563 | Ø 581 | 1/2" H | 3/4” M | 1” H | 1 1/4” H |
| SANIT SE 250 | 615 | 270 | 795 | 190 | - | - | 325 | 1,541 | Ø 608 | 3/4” H | 3/4” M | 1” H | 1 1/4” H |
| SANIT SE 300 | 615 | 270 | 788 | 190 | - | - | 325 | 1,790 | Ø 608 | 3/4” H | 3/4” M | 1” H | 1 1/4” H |
| MODELS | SANIT SE 100 | SANIT SE 150 | SANIT SE 200 | SANIT SE 250 | SANIT SE 300 | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Characteristics | ||||||||||
| Installation | Floor-mounted | Floor-mounted | Floor-mounted | Floor-mounted | Floor-mounted | |||||
| Total volume | L. | 100 | 150 | 200 | 250 | 300 | ||||
| Max. storage temperature | ºC | 90 | 90 | 90 | 90 | 90 | ||||
| Maximum working pressure of the tank | bar | 7 | 7 | 7 | 7 | 7 | ||||
| Max. primary temperature | ºC | 110 | 110 | 110 | 110 | 110 | ||||
| Maximum primary working pressure | bar | 10 | 10 | 10 | 10 | 10 | ||||
| Operation | ||||||||||
| Continuous flow l/h D 30º | Qp 1 m3/h Qp 3 m3/h Qp 5 m3/h |
620.1 767.4 855.9 |
722.9 849.8 972.3 |
869.3 970.3 1,077.4 |
957.9 1,069.1 1,177.3 |
1,037.2 1,150.5 1,203.0 |
||||
| Peak flow l/10 min D 30º | Qp 1 m3/h Qp 3 m3/h Qp 5 m3/h |
274.0 298.8 314.2 |
389.3 399.6 419.2 |
488.2 504.7 522.2 |
588.1 606.7 625.2 |
700.4 706.6 715.9 |
||||
| Flow up to 1 hour l/h D 30º | Qp 1 m3/h Qp 3 m3/h Qp 5 m3/h |
723.1 970.4 958.9 |
943.5 1,004.3 1,126.8 |
1,075.3 1,176.3 1,283.4 |
1,215.4 1,326.6 1,283.4 |
1,624.3 1,665.5 1,718.0 |
||||
| Power transmitted kW | Qp 1 m3/h Qp 3 m3/h Qp 5 m3/h |
21.6 56.8 29.9 |
27.8 29.9 34.0 |
29.9 34.0 37.1 |
33.5 36.7 39.7 |
39.1 40.2 42.2 |
||||
| DHW efficiency class |  |
 |
Qp: Primary flow rate / Primary temperature 80°C / Storage temperature 60°C
| MODELS | SANIT SE |
|---|---|
| Thermometer | |
| Adjustable thermostat | |
| On/off switch |
| VOLUME | 100 | 150 | 200 | 250 | 300 | 505 | 745 | 1000 |
|---|---|---|---|---|---|---|---|---|
| 1.5/2.5/3.5 kW resistor | ||||||||
| DHW expansion vessel | ||||||||
| Dielectric sleeves | ||||||||
| DHW safety valve | ||||||||
| Cathodic protection | ||||||||
| Sanit S Hydraulic Kit |
